Wyoming Oversize Permits Overweight Permits phone number: (630) 800-4551.
Wyoming Oversize Permits are necessary for carrying loads that exceed the state’s standard size or weight limits. Whether you’re getting Wyoming self-issuing permits, looking for the Wyoming oversize permits phone number, or calculating the Wyoming overweight permit fee, having proper information is essential. Compliance assures safe and legal transportation from the time an application for a Wyoming oversize permit is submitted until the time laws are followed. Furthermore, for specialty needs such as Wyoming superloads permits, Wyoming port of entry permits, or a Wyoming travel permit, Overweight permit is your go-to partner. Call us at 630-800-4551 for experienced advice targeted to your needs.
Wyoming Oversize Permits are required for moving loads that exceed the conventional dimensions and weight restrictions in Wyoming. Overweight Permit, a leading permit agency specialized in all types of trucking oversize permits, makes it easier to obtain the permits required for safe and compliance operations. We’re here to help you understand Wyoming rules, apply for permits, and calculate expenses. We also assist operators in Wisconsin by providing services for obtaining Wisconsin Oversize Permits, Wisconsin Overweight Permits, Wisconsin Overhang Permits, Wisconsin Single Trip Permits, and Wisconsin Annual Permits. Overweight Permit will take the worry out of obtaining permits in both Wyoming and Wisconsin—call us now at 630-800-4551 for dependable and experienced assistance!
In Wyoming, any vehicle or freight that exceeds the following dimensions or weight standards is considered oversize or overweight:
Legal Size Limits
Width: 8 feet 6 inches, measured from the furthest points of the load’s widest section, excluding any safety-related attachments.
Height: The maximum allowable height is 14 feet, measured from the road surface to the highest point of the load or vehicle, depending on which is taller.
Overall length (for combined vehicles) is 85 feet (measured from the frontmost section of the vehicle or load to the rearmost component, whichever is longer).
Semi-Trailer length: 48 feet.
Legal Weight Limits:
Maximum Gross Weight: 80,000 pounds (or 117,000 pounds on interstate routes, including load weight).
Single axle weighs 20,000 pounds.
Tandem axle weighs 36,000 pounds.
Triple axle: 42,500 pounds.
Per wheel, 10,000 pounds.
Wyoming offers single-trip permits for load that exceed the legal size or weight restrictions and cannot be split. These permits enable one-way transportation from the starting point to the destination within the time limits indicated in the permit. If the load needs to be returned to its original place, an additional permit may be necessary. Fees start at $15 and vary depending on the details of the permit.
Wyoming does not often grant annually permits for oversized or overweight loads. Instead, the state provides 90-day permits, with specified limitations based on the kind of vehicle and weight.
Typical Permit Requirements:
Maximum width: 12 feet (Class D) or 18 feet (Classes B and C).
Maximum height: 15 feet (Class D) or 17 feet (Classes B and C).
Maximum length: 120 ft.
The maximum gross vehicle weight (GVW) is 160,000 pounds.
Maximum Single Axle Weight: The limit for a single axle is set at 25,000 pounds, ensuring compliance with Wyoming’s weight regulations.
Maximum Single Axle Weight in a Tandem Axle: 29,000 pounds, which refers to the highest allowable weight for a single axle within a tandem axle configuration.
Maximum Tandem Axle Weight: The allowable weight limit for a tandem axle setup is 55,000 pounds.
Maximum triple axle weight is 65,000 pounds.
The cost of the permit varies according on its nature and specific criteria.
In Wyoming, transporting loads wider than 8 feet 6 inches requires an oversize permit from the Wyoming Department of Transportation.
Oversized vehicles and loads must be prominently marked on all sides and extremities with 12-inch square red or neon orange flags.
For overhangs with a width of less than two feet, opt for using just one flag. Use two flags if the overhang is two feet or more wide.
Oversized vehicles must have a flag that states "Oversize Load."
Signs should be 5 feet in length and 10 inches high. To ensure optimal visibility, use black letters that are 8 inches tall on a yellow background.
Amber clearance lights must be mounted at the load's front corners, with red lights at the back and any sticking extremities. The vehicle must be equipped with a spinning, flashing, or strobe amber light. For overlength vehicles, make sure a red bulb and a reflector are installed at each rear corner or extremity of the overhang.
On two-lane roadways, load over 14 feet in width require an escort vehicle. This restriction applies to weights of more than 15 feet on interstates or four-lane roadways with a left-turn lane.
Loads exceeding 110 feet in length must be accompanied by escorts on two-lane roads. For interstate highways, the need for escorts is determined by the department’s discretion.
If the back overhang is more than 25 feet, a rear escort vehicle is necessary.
Height: Loads taller than 17 feet require an escort using a height-measuring instrument; for lesser heights, escorts may be necessary depending on the conditions.
Weight: Overweight loads require a rear escort, with a front escort available depending on the conditions.
The standards and demands for loads wider than 8′ 6″ are as follows:
Wyoming Holiday Restrictions for Oversized Loads.
Unless specifically indicated in Wyoming permits, oversize loads are restricted from moving on important holidays such as New Year’s Day, Memorial Day, Independence Day, Labor Day, Thanksgiving, and Christmas. If these holidays happen on a Saturday or Sunday, more limitations may be imposed.
Wyoming Legal travel times for oversized loads.
Authorized vehicles may operate between half an hour before dawn and half an hour after sunset, save in the following cases:
Combination units up to 110 feet in length.
Single vehicles up to 75 feet long.
Loads with widths up to 10 feet on Interstates
Escorted vehicles or load exceeding 10′ width on Interstates, or 8.5′ on principal and minor highways
Wyoming Road and Bridge Restrictions for Oversized Loads
Wyoming uses the Federal Bridge Formula to set particular bridge rules. Oversized road regulations might include:
Avoiding construction zones and following warnings within work zones.
Giving priority to traffic, police enforcement, and emergency vehicles.
Keeping to specified weight limitations for both driven and hauled vehicles
Wyoming Seasonal Weight Restrictions for Oversized Loads
Wyoming does not impose seasonal restrictions, such as the Frost Law seen in other states. However, oversize permits may include load-specific seasonal requirements. Additionally, during “no unnecessary travel advisories,” oversize load must stop traveling. Loads in route are only authorized to go to the nearest parking area or town and must get Wyoming Highway Patrol approval before proceeding.
Wyoming follows the federal regulation for maximum allowable width, which is 8’6″. Any load more than this width must get a permit before driving on public roadways.
Load Limits before a Permit is required:
Maximum width is 8′ 6″ (measured from the outermost points, excluding safety devices).
Restrictions on axle weight include legal limits.
Single axle: 20,000 pounds.
Tandem axle: 36,000 pounds.
Triple axle: 42,500 pounds.
Each wheel weighs 10,000 pounds.
Maximum allowable axle weight with permits:
Single axle: 25,000 pounds.
Single axle in a tandem setup: 29,000 lbs.
Tandem axle: 55,000 pounds.
Triple axle: 65,000 pounds.
Oversize tire requirements include load operating condition, correct inflation, and at least 2/32″ tread depth (steering tires must have at least 4/32″).
The maximum weight limit is 650 pounds per inch of tire width, or 750 pounds per inch for steering tires.
Tires cannot contain extensions made of materials other than rubber or tire chains, unless necessary for safety or explicitly approved.
Out-of-state operators and carriers can request a Wyoming trip permit, which grants a 96-hour IRP authorization for temporary use. The fee is $20 per vehicle or $40 for vehicle combinations. Additional costs may be charged for processing and managing the permit request.
Non-resident carriers can get a 96-hour IFTA authorization in Wyoming. The cost of the permit is $7.50 for individual vehicles and $15 for combined units. Processing and handling costs, similar to those for travel permits, may apply.
Superloads Permits
Special permits are necessary for loads that exceed the dimensions and weights listed below:
Width: 18′ (Class B and C)
Height: 17 feet (Class B and Class C).
Length: 120′
Single axle: 25,000 pounds.
Single axle in tandem setup: 29,000 pounds.
Tandem axle: 55,000 pounds.
Triple axle: 65,000 pounds.
Note: For load wider than 18 feet, the transporter must submit a 24-hour advance notice.
Amber Light Permits
Escorting trucks carrying oversize loads must have amber warning lights placed on their roofs.
Loading Zone Permits
Permits for access to commercial loading zones may be available for non-commercial delivery trucks.
In Wyoming, punishments for exceeding permissible weight restrictions vary depending on the severity of the infringement. While the first infringement carries no consequences, successive infractions may result in fines starting at $120.
For commercial vehicle offenses, the normal deposit schedule includes:
$20.00 in court expenses,
The court automation fee is $10.00.
An extra $10.00 for civil legal services, as specified by court rules or statutory requirements.
Fines grow gradually as follows:
Up to 2,000 pounds beyond the limit: $65.00.
2,001 to 4,000 pounds beyond the limit – $115.00.
4,001 to 6,000 pounds beyond the limit: $165.00…
Over 20,001 pounds – $1,040.00.
Permit fees for oversize and overweight loads in Wyoming vary according to the load’s type, size, and weight. A single-trip permit typically costs $15, although permits for superloads or longer periods, such as 90-day permits, can cost more than $100.
Additionally, an application fee may be required to fund the processing and management of the permit request.
Truck Permit Service
To make the procedure easier, firms such as Overweight Permit provide full services to motor carriers. They manage everything from obtaining permits to communicating with regulatory agencies, assuring complete compliance with Wyoming standards. These services save time, decrease headache, and help you avoid fines, regardless of the kind, nature, or destination of the load.
You must get a permit if your vehicle or load exceeds Wyoming authorized size or weight restrictions. This includes loads wider than 8 feet 6 inches, tandem axles weighing over 36,000 pounds, and single axles weighing more than 20,000 pounds.
You can request a permit directly from the Wyoming Department of Transportation (WYDOT), or for faster and easier service, contact Overweight Permit at 630-800-4551 for experienced assistance with the complete procedure.
Single-trip permits begin at $15, however the ultimate cost varies depending on the size, weight, and kind of permit required. Permits for superloads or prolonged periods (such as 90-day permits) will cost extra.
Wyoming normally does not grant annually permits for oversize or overweight loads. Instead, 90-day permits are offered with limits based on vehicle type and size.
Yes, subject to the amount of the load. On two-lane and interstate roadways, loads larger than 14 feet wide, 110 feet long, or 17 feet tall frequently necessitate the use of escort cars. Call us to confirm the escort needs for your unique journey.
Oversize trucks can travel between 30 minutes before dawn and 30 minutes after dusk. Additional restrictions apply during vacations and for bigger loads, particularly those needing escorts.
Yes. Fines start at $65 for loads up to 2,000 pounds overweight and can reach $1,000 for serious offenses. Repeat crimes may result in extra sanctions.
Yes. Out-of-state carriers can apply for a Wyoming Trip Permit ($20) for temporary usage, as well as a 96-hour Fuel Permit ($7.50 for single cars) for IFTA compliance.
A superloads measures more than 18 feet in width, 17 feet in height, and 120 feet in length, or it exceeds weight constraints such as 65,000 pounds for triple axles. These require specific permits and at least 24 hours’ notice.
We take the hassle out of permits. Our skilled staff manages every element, from paperwork to DOT communication, assuring timely approvals, accurate compliance, and cost-effective routing.
Absolutely! We specialize in Wyoming and Wisconsin permitting services, including single trip, overhang, annually, and overweight permits, offering you full protection in both states.
Depending on the load and travel restrictions, we may often complete permits on the same day. Call us at 630-800-4551 for instant assistance and expedited service.
Yes, each direction usually requires its own permit. Overweight Permit will handle both permits for round journeys, keeping you compliant the entire time.
Yes, we specialize in processing difficult superloads and custom permits, such as height, length, and multi-axle configurations. We verify that all DOT regulations are followed for legal and safe transportation.
It’s simple: phone 630-800-4551 and give us your route, load size, and vehicle information. Our permit professionals will walk you through the process step by step so you can get started quickly.
Lorem ipsum dolor sit amet, consectetur adipiscing elit. Ut elit tellus, luctus nec ullamcorper mattis, pulvinar dapibus leo.
