Idaho Oversize Permits Idaho Oversize & Overweight Permits Phone number: (630)800 4551.
Idaho Oversize Permits and Overweight Permits
Idaho Oversize Permits are required for transportation businesses that deal with oversize loads and enormous commodities. These permits address all aspects of Idaho oversize permits, including the price, online application, and requirements. For further information, call Overweight Permit at (630)222-5770. The procedure include learning the Idaho oversize permit phone number, Idaho oversize permit fee, and Idaho trip permit cost. Businesses must also be familiar with Idaho permits, Idaho port of entry permits, and the Idaho trip permit phone number. Furthermore, understanding the Idaho temporary trip permit, Idaho DOT permits, Idaho overweight permit regulations, Idaho overweight permit online, and Idaho overweight permit application is essential.
Idaho Oversize Permits are classified into numerous kinds, including Idaho Overweight Permits, Idaho Overhang Permits, Idaho Single Trip Permits, and Idaho Annual Permits. Each of these permits serves a distinct purpose, depending on the load and frequency of transit. The application process may appear difficult, but understanding the intricacies may make the journey easier. Always guarantee compliance to prevent legal issues and ensure smooth operations for your company.
Idaho Oversize Permits & Overweight Regulations:
According to Idaho law, any load exceeding the following dimensions and weights is regarded as an oversize/overweight load:
Legal Size Limits:
- Width: 8 feet 6 inches (measured from the broadest extremities, excludes safety devices).
- 14 feet high, measured from the ground to the top of the load or the vehicle.
- 45 feet (from the front of the vehicle or load to the back of the unit) for a single unit
- 53 feet for semi-trailers and 48 feet for roads that aren’t on a national network, measured from the front of the vehicle or load to the back.
- Front overhang is 4 feet; rear overhang is 10 feet.
Legal Weight Limits:
- Maximum Gross Weight: 80,000 pounds (including load)
- Single Axle: 20,000 pounds
- Tandem Axle: 34,000 pounds
- Tridem Axle: 42,000 pounds.
Idaho Oversize Permits Single Trip Oversized/Overweight Permits:
Idaho issues a single-trip permit for non-divisible load that exceed legal size and weight restrictions. This permit is good for a single travel from point A to point B within the given periods. If the load is to be returned to its original site, a second permit may be required.
Idaho Annual Oversized/Overweight Permits:
An annual permit in Idaho permits a specified vehicle and allowed load to travel unfettered for up to 365 days, allowing for repeated one-way trips between two defined places on recognized routes.
To get an annual permit, a load must meet the following criteria:
- Maximum width: 16 feet (12 feet 6 inches for red code routes)
- Maximum height: 15 feet 6 inches – Maximum length: 110 feet
- Maximum Gross Vehicle Weight (GVW): 256,000 pounds
– Note: Per axle weight shall not exceed 20,000 pounds.
Idaho Overse Permits Wide Load Requirements:
Any load wider than 8 feet 6 inches requires an oversized permit from the Idaho Department of Transportation.
Idaho Overse Permits Load Flag Requirements:
Place 18-inch square red or fluorescent orange flags on both sides and extremities of large vehicles and load, including rear overhangs over 4 feet.
Idaho Overse Permits Load Banner Requirements:
"Oversize load" banners must be displayed on all oversized vehicles.
Idaho Overse Permits Load Sign Requirements:
Signs must be at least 5 feet long and 12 inches tall, with 8-inch high black lettering (1-inch stroke) on a yellow backdrop.
Oversize Load Lighting Requirements:
Vehicles must have visible lights from at least 500 feet, either steady or flashing. This applies between half an hour after dusk and half an hour before sunrise. Amber lights should be utilized for the front and load extensions, while red lights are necessary for the back.
Requirements for Oversized Pilot Cars or Escort Vehicles:
Pilot car requirements vary by route color (red, black, or white).
- Red routes:
- Width: 8 feet, 10 inches to 10 feet 1 front escort.
- Width: 10 feet 1 inch to 12 feet 6 inches. One escort positioned at the front and another at the back.
- Length above 75 feet: one front escort.
- Length over 75 feet, breadth 8 feet 7 inches to 12 feet 6 inches. One escort positioned at the front and another at the back.
Black routes:
- Width: 12 feet 1 inch to 14 feet: 1 front escort and 1 rear escort.
- Length above 100 feet: one front escort.
- Length over 100 feet, breadth 12 feet. 1 inch to 18 feet: 1 front escort and 1 rear escort.
White routes:
- Width 15 feet 1 inch to 18 ft: one rear escort.
Additional escort requirements may be stated in the permit.
Idaho oversize Permits Wide Load Restrictions:
Any load over 8 feet 6 inches in width must meet with the following Idaho restrictions:
Oversize Holiday Restrictions:
Oversized loads cannot be transported on New Year’s Day, Memorial Day, Independence Day, Labor Day, Thanksgiving Day, or Christmas Day, unless indicated in the permit.
Red-coded routes:
Do not travel after 2 p.m. On the day preceding a holiday or holiday weekend. Travel can resume at daybreak the day following a holiday or weekend.
Interstate and black-coded routes:
Travel after 4 p.m. on the day before a holiday is prohibited for load that are more than 10 feet wide, 100 feet long, or 15 feet tall. Travel can resume at daybreak the day after the holiday.
Oversize Legal Travel Time Restrictions:
Travel is authorized every day from half an hour after sunrise to half an hour after nightfall. Local limits exist in certain cities, such as Boise, Caldwell, and Idaho Falls. The permit will detail the holiday travel requirements based on the measurements.
Oversized Road and Bridge constraints: –
Idaho adopts the Federal Bridge Formula, which defines bridge constraints. Additional traffic limitations include driving past construction zones and ignoring warning signals.
Failing to prioritize traffic for law enforcement, emergency vehicles, and so forth.
Keep in mind that all vehicles, whether driven or towed, must conform to the stipulated bridge weight limitations.
Oversized Seasonal Weight Restrictions:
The Frost Law is applicable in a number of states and Canadian provinces. Idaho oversize load permits may have specific limitations depending on the kind and nature of the load.
The Department may set size, weight, and speed limitations on state roadways to safeguard them from potential damage caused by weather or other factors. Loads are divided into four categories:
- Legal permissible weight;
- 16,000 pounds on any axle;
- 14,000 pounds on any axle; and
- 12,000 pounds on any axle.
Spring breakup weight limitations on two-lane highways limit special permit width to 12 feet 6 inches throughout the restriction period.
During spring break up, expect 30 mph speed limits and weight restrictions, such as a minimum tire width of 10 inches or greater, a maximum axle weight of 10,000 pounds for single axles with two single wheels, and a maximum axle weight of 14,000 pounds for single axles with four or more tires.
Idaho Wide Load Limits:
Idaho follows the federal legal width restriction of 8 feet 6 inches. Any load more than this width requires a permit to drive on public highways.
Maximum Load Limits before Requiring Permits:
Width: 8’6″ (measured from the outermost points of the extremities, excluding safety devices)
Axle Weight Limitations:
Permissible axle weight limits:
Maximum gross weight: 80,000 pounds (including load)
Single axle: 20,000 pounds
Tandem axle: 34,000 pounds
Tridem axle: 42,000 pounds
Use the Federal Bridge Formula to establish maximum permissible weight.
Maximum axle weight limits:
Single axle: 33,000 pounds (black routes)
Tandem axle: 56,000 pounds (black routes)
Tridem axle: 70,500 pounds (black routes).
Oversize Tire Regulations:
Tires must be in good working order, adequately inflated, and have a minimum tread depth of 2/32 inch.
The maximum permissible weight is 600 pounds per inch of tire width.
Idaho allows studded snow tires from October 1 to April 30. There are no formal limitations on tire chains, although officials advise against using them unless absolutely essential. When the roads are snowy or icy, signs reading “Chains required beyond this point” will be put.
A solid rubber tire on a vehicle must have at least one inch of rubber on the whole traction surface.
Chains may be necessary at some areas, including Lookout Pass, Fourth of July Pass on Interstate 90, and Lolo Pass on State Highway 12. The state will give early notification of chain requirements.
Idaho Oversize Permit & Overweight Load Fines
Fines for oversize and overweight loads in Idaho vary according to the extent to which the vehicle exceeds the authorized weight limit. Penalties begin at $300 and can exceed $2,500. In severe situations, offenders may face county prison term. Repeated crimes within a 12-month period may result in fines of several thousand dollars and/or up to six months in prison.
Truck Permit Service
Overweight Permit provides complete trucking permit services, assisting motor carriers in obtaining the required oversize and overweight permits. They work with authorities to guarantee conformity to state rules, saving considerable time and effort while avoiding potential penalties. Regardless of the size, nature, or destination of your load, you can count on them for competent support.
FAQs
Idaho issues a variety of permits, including Oversize Load permits, Overweight Permits, Single Trip Permits, Annual Permits, and Temporary Trip Permits. Each permit type is designed to meet specific transportation demands, whether it’s a one-time journey or ongoing hauling.
To apply for an Idaho Oversize Permits, please visit the Idaho Department of Transportation official website or call the Overweight Permit department at (630) 222-5770. The online application procedure is straightforward and effective.
The cost of an Idaho Oversize Permits varies according on the kind of permit (single trip or annually), the weight of the load, and the route. For precise cost information, contact the Idaho Oversize and Overweight Permits Office.
Yes, Idaho permits online applications for Oversize Permits. To begin the application process, visit the Idaho Department of Transportation’s official website.
In Idaho, any load more than 8 feet 6 inches in width, 14 feet in height, 45 feet in length for a single unit, or 80,000 pounds in weight is considered an oversize or overweight load and requires a permit.
Ensure compliance with Idaho oversize and overweight requirements, such as conforming to width, height, and weight constraints, acquiring required permits, and sticking to travel duration limits. Noncompliance can result in fines ranging from $300 to over $2,500.
Yes, there are travel limitations on some holidays, and some routes may have time or weight constraints. On holidays or holiday weekends, travel after 2 p.m. may be forbidden.
A Single Trip Permit is authorized for only one trip between two places, but an Annual Permit allows for several excursions on approved routes throughout the year. Annual permits are excellent for regular and continuous transportation of oversize load.
Loads wider than 8 feet 6 inches require an Oversize Permit. These loads must additionally show “Oversize Load” flags, utilize appropriate lighting, and have pilot vehicles (escorts) based on their large and route.
Yes, depending on the breadth and length of the load, pilot vehicles may be necessary. The number of escorts required varies depending on the route and size of the load, as specified in the granted permit.
Noncompliance with Idaho oversize load restrictions may result in penalties, delays, or legal action. Repeat crimes may result in harsher penalties, including fines of up to $2,500 or prison time.
Yes, trucks hauling oversize loads must comply with special equipment requirements, such as employing amber or red lights, displaying flags and banners, and occasionally outfitting vehicles with chains or other weather-related gear depending on the conditions.
Overweight Permit services can help to speed up the permit application procedure while also ensuring that state regulations are followed. They assist firms in saving time, reducing the danger of fines, and overcoming the complexity of acquiring oversized/overweight permits for all load kinds and routes.
Idaho enforces tougher weight limitations on highways during seasonal restrictions, such as spring thaw, to minimize damage. Specific axle weight and speed limits may apply, and these requirements are stated in the permits granted.
Yes, Overweight Permit provides assistance with both single-trip and yearly permits, regardless of load size or frequency. Whether you require a one-time permit or frequent, ongoing permits, their staff can help you through the procedure to guarantee compliance and prevent costly delays.
